Page #1	INSTALLATION MANUAL	STEP 1:
	SUGGESTED TOOLS	PAGE 1 OF 2

Power Tools

DeWALT 12" COMPOUND MITER (60-80) TOOTH CARBIDE BLADE)
SKILL WORM DRIVE (24 TOOTH CARBIDE BLADE)
SKILL 10" CIRCULAR SAW (60-80 TOOTH CARBIDE BLADE)
MILWAUKEE ½" HAMMER DRILL
MILWAUKEE ½" HOLE SHOOTER
MAKITA 14.4 VOLT DRILL/DRIVER (VARIABLE SPEED, TORQUE SETTING)

MISC.

FRAMING SQUARE
POWER STRIP
EXTENSION CORD
TOOL BELT
6' LADDER
GLOVES
GOGGLES
TOOL BOX FOR MISC. FASTENERS

Hand Tools

POP RIVET GUN
16 OZ. RUBBER MALLET
16 OZ. HAMMER
STANLEY "99" UTILITY KNIFE
FLAT AND PHILLIPS HEAD SCREWDRIVER
PLIERS
FLAT HEAD VISE GRIPS
NEEDLE NOSE PLIERS
4' LEVEL
TIN SNIPS
CHALK LINE
PUTTY BLADE
30' MEASURING TAPE
CAULK GUN

Drill Bits

MAGNETIC BIT HOLDER W#2 PHILLIPS BIT
2" OR 3" PHILLIPS BIT EXTENSION
MAGNETIC NUT SETTERS (1/4", 5/16", 3/8")
¼"", 9/64", 2,16" DRILL BIT
¼" MASON BIT
5/8" WOOD BORING BIT or HOLE SAW

JOB SITE PREPARATION REMINDERS

Most Rooms are built on existing foundations. These foundations may have variables that can hinder the installation of the room. The information provided below may help locate the problem areas within the job.

Check to see if the foundation is level. If the foundation is not level, an all glass kickplate may not be used in the room, but a 2 stage kickplate (part solid/part glass) can.
The foundation must be higher than the grade of the surrounding area. The tracks that are secured to the foundation have weep holes in them and standing water can get in the tracks and the room.
The foundation may have small hairline cracks, but large buckling of concrete will need to be repaired.

Page #1

INSTALLATION MANUAL

STEP 1:

SUGGESTED TOOLS

PAGE 1 OF 2

Power Tools

MISC.

Hand Tools

Drill Bits

JOB SITE PREPARATION REMINDERS